single phase half controlled psbh 54 i dav = 56 a rectifier bridge, b2hk v rrm = 800-1600 v preliminary data sheet powersem gmbh, w alpersdorfer str. 53 d - 91126 schwabach phone: 09122 - 9764 - 0 fax: 09122 - 9764 - 20 eco-pac tm 3 ? 2005 powersem reserves the right to change limits, test conditions and dimensions data according to iec 60747 refer to a single thyristor unless otherwise stated symbol test conditions maximum ratings i dav t c = 85 c; per module 56 a i tsm t vj = 45 c t = 10 ms (50 hz), sine 550 a v r = 0 t = 8.3 ms (60 hz), sine 600 a t vj = 125 c t = 10 ms (50 hz), sine 490 a v r = 0 t = 8.3 ms (60 hz), sine 540 a i 2 dt t vj = 45 c t = 10 ms (50 hz), sine 1500 a2s v r = 0 t = 8.3 ms (60 hz), sine 1490 a2s t vj = 125 c t = 10 ms (50 hz), sine 1200 a2s v r = 0 t = 8.3 ms (60 hz), sine 1210 a2s (di/dt) cr t vj = 125 c repetitive, i t = 50 a 150 a/s f=50hz, t p =200s v d =2/3v drm i g =0.3 a non repetitive,i t = 1/2 i dav 500 a/s di g /dt=0.3a/s (dv/dt) cr t vj = 125 c v d =2/3v drm 1000 v/s r gk = , method 1 (linear voltage rise) p gm t vj = 125 c t p =30s 10 w i t =i tavm t p =300s 5w p gavm 0.5 w v rgm 10 v t vj -40... + 125 c t vjm 125 c t stg -40... + 125 c v isol 50/60 hz, rms t = 1 min 2500 v i isol 1 ma t = 1 s 3000 v m d mounting torque (m4) 1.5 - 2.0 nm 14 - 18 lb.in. weight typ. 46 g v rsm v rrm type v dsm v drm (v) (v) 900 800 psbh 54/08 1300 1200 psbh 54/12 1500 1400 psbh 54/14 1700 1600 psbh 54/16 features ? ? package with dcb ceramic base plate ? isolation voltage 3000 v ? planar glass passivated chips ? low forward voltage drop ? leads suitable for pc board soldering ? ul release applied applications ? supplies for dc power equipment ? imput rectifier for pwm inverter ? battery dc power supplies ? field supply for dc motors advantages ? easy to mount with four screws ? space and weight savings ? improved temperature and power cycling capability ? high power density ? small and light weight eco-pac tm 3
eco-pac tm 3 powersem gmbh, w alpersdorfer str. 53 d - 91126 schwabach phone: 09122 - 9764 - 0 fax: 09122 - 9764 - 20 ? 2005 powersem reserves the right to change limits, test conditions and dimensions package style and outline dimensions in mm (1mm = 0.0394?) symbol test conditions characteristic value i d , i r t vj = 125c, v r = v rrm , v d =v drm 5ma v f ,v t i t = 80 a, t vj = 25 c 1.64 v v to for power-loss calculations only 0.85 v r t 11 m ? v gt v d =6v t vj = 25c 1.5 v t vj =-40c 1.6 v i gt v d =6v t vj = 25c 100 ma t vj =-40c 200 ma v gd t vj = 125c v d =2/3v drm 0.2 v i gd t vj = 125c v d =2/3v drm 5ma i l t vj = 25c, t p =10s, v d =6v 450 ma i g =0.45a, di g /dt=0.45a/s i h t vj = 25c, v d =6v, r gk = ? 200 ma t gd t vj = 25c, v d =1/2v drm 2s i g =0.45a, di g /dt=0.45a/s t q t vj = t vjm ; i t =20a; t p =200s;di/dt=-10a/s 250 s v r =100v; dv/dt=15v/s; v d =2/3v drm r thjc per thyristor; dc 0.8 k/w per module 0.2 k/w r thjh per thyristor; dc 1.1 k/w per module 0.183 k/w d s creepage distance on surface (pin to heatsink) 11.2 m m d a strike distance in air (pin to heatsink) 11.2 m m a max. allowable acceleration 50 m/s2
|
